#Weslo pro spinning bike serial number
#Weslo pro spinning bike serial
#Weslo pro spinning bike manual
#Weslo pro spinning bike Patch

While another person holds the Upright (13) near (16) to the Upright (13) with four M4 x 16mmР”РЋ0. Then, connect the console pulse wires to the Pulse Wires (71). The Upright (13), connect the console wire to the While another person holds the Console (16) near Repeat this step for the Right Pulse Bar (66). With two M6 x 38mm Button Bolts (69) and two Insert the left Pulse Wire (71) into the Upright (13)Р”Р„nd pull it upward out of the top of the Upright.Р”Вo not pinch the wires. That the hexagonal holes are in the indicated Have another person hold the Left Pulse Bar (65) Identify the Left Pulse Bar (65), which is marked The other end into an outlet installed in accordance Of the AC adapter into the jack on the console plug To avoid damaging the console, use only a The telephone number on the cover of this manual. Store where you purchased this product or call

To purchase an optional AC adapter, contact the The diagram inside the battery compartment. Make sure to orient the batteries as shown by The battery cover, insert the batteries into the battery compartment, and reattach the battery cover. Otherwise, you may damage the console displays or other electronic components. To cold temperatures, allow it to warm to room IMPORTANT: If the Console has been exposed (not included) alkaline batteries are recommended. The Console (16) can use four 1.5V 'D' batteries Attach the SeatР”Р‡rame and the Seat (12) to the Rear Frame withР”Р‡our M6 x 42mm Button Screws (49) and four M6 Have another person hold the Seat Frame (7) under

#Weslo pro spinning bike Patch

Do notР”Р„ttach the Backrest (5) to the Seat Frame (7) withР”Р‡our M6 x 38mm Patch Screws (48) and four M6 Two M8 x 70mm Button Bolts (54), two M8 Split With two M10 x 75ram Carriage Bolts (51) and twoР”Р„ttach the Seat Frame (7) to the Handlebar (6) with Press a Wheel Cap (19)Р”Р„ttach the Rear Stabilizer (4) to the Rear Frame (2) Then tighten the Adjustment Knob (17) into theР”Р„ttach the Wheels (18) to the Rear Stabilizer (4) Slide the Rear Frame (2) out of the Frame (1), and M10 x 75ram Carriage Bolts (51) and two M10 While another person lifts the front of the Frame (1),Р”Р„ttach the Front Stabilizer (3) to the Frame with two If a part is not in the hardware kit, check to see if it has been preassembled. The number following the parentheses is the quantity needed for assembly. Number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of In addition to the included tools, assembly requiresР”Р„s you assemble the exercise cycle, use the drawings below to identify the small parts used in assembly. Place all parts of the exercise cycle in a cleared area and remove the packing materials, Do not dispose of the packing materials until assembly is completed, If you have questionsР”Р„ssembly requires two persons.

#Weslo pro spinning bike manual

The parts that are labeled in the drawing below.Р”Р‡or your benefit, read this manual carefully before Number decal are shown on the front cover of thisР”В«efore reading further, please familiarize yourself with

#Weslo pro spinning bike serial

The model number and the location of the serial

#Weslo pro spinning bike serial number

Model number and serial number before contacting To let you enjoy this healthful exercise in the convenience and privacy of your home.Р”Р„fter reading this manual, please see the back cover The 10.8XР”В®xercise cycle offers a selection of features designed Cycling is one of the most effective exercises for increasing cardiovascular fitness,Р”В«uilding endurance, and toning the body.

Thank you for selecting the new WESLO PRO TMР”РЋ0.8X exercise cycle. This drawing shows the location(s) of the

Sears, Roebuck and Co., Hoffman Estates, IL 60179